CDM 12/ CDM PRO optical pick-up assembly.

This optical pick-up unit (OP) can be used as a spare part for jukebox applications based on the common CDM12/CDM PRO industrial player. All factory adjustments are already implemented. This assembly comes with a compatible turntable motor that is used in CDM12, PRO and PRO2 players.
The optical pick-up is the most critical and also the most commonly replaced part of the player. They are compatible with all brands of jukeboxes as long as CDM 12 or CDM PRO player is used.
CDM 12 and CDM PRO are electronically the same units. CDM 12 has been phased out due to flaws in its mechanical design. We recommend repairing only CDM 12 players from NSM jukeboxes. NSM modified some of the CDM 12 players by installing sledge guidance plane preventing excessive friction.

CDM PRO2 optical pick-up assembly

This optical pick-up unit can be used as a spare part for jukebox application based on the common CDM PRO2 industrial player. All factory adjustments are already implemented. This optical pickup does not come with a turntable motor. It is extremely important to replace the turntable motor when replacing the optical pickup. Please read the suggested modification to PRO2 players.
CDM PRO2 optical pickup is not compatible with CDM12 or CDM PRO players.

CDM 12/PRO/PRO2 turntable motor

Turntable motor replacement for all the players CDM 12 Ind, CDM PRO and CDM PRO2. We recommend replacing the motor each time you replace the optical pickup. This is a most common failure with CDM PRO2 players. See the service instructions in the Service folder.